Vutec LECTRIC I - Installation Instructions Manual de usuario descargar pdf (Pagina 2)

LectricI&III-Rev F 03/21/2011

LECTRIC I & III

WALL OR UNDER CEILING MOUNT

GENERAL

The LECTRIC I or III screen may be mounted to the wall or ceiling as shown in Figures 1 and 2. Lectric I and

Lectric III meet requirement for fire-resistant and low smoke-producing characteristics

. The screen comes with three

mounting brackets and screws as shown in Figures 3 and 4. Where possible, the mounting brackets should be installed

to rigid structural members. If this is not possible, suitable wall anchors or other mounting methods must be

considered.

Unless otherwise specified, the motor locates on the left end of the housing. The screen fabric rolls down from the

backside of the roller.

A basic Toggle switch is supplied with the screen. Decorator wall switch or other controls are optional.

Figure 1 Figure 2

Wall Mounted Ceiling Mounted

Figure 3 Figure 4

Wall Mounted Ceiling Mounted

1 2 3 4

Sin comentarios

Vutec LECTRIC I - Installation Instructions Manual de usuario Pagina 2